Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR6870Ci — Trang 24/33

Code: E584-8001

Description: shutter unit error (Finisher-R1/R2)
The shutter open sensor does not go off (i.e., the shutter is not closed).
Remedy: 1) Check the shutter home position sensor. Is the sensor normal? 2) Check the wiring between the finisher controller PCB and the stack edging motor and between the finisher controller PCB and the shutter open/close clutch. Is the wiring normal? 3) Is there a fault in the shutter mechanism? 4) Try replacing the stack edging motor or the shutter open/close clutch. Is the problem corrected?

Code: E590-8001

Description: There is an error in the punch motor. (punch unit)
The punching home position sensor is not detected when the punch motor has been driven for 200 msec.
Remedy: Check the punch home position sensor, horizontal registration motor, and punch driver PCB; then, turn off and then on the main power.

Code: E590-8002

Description: There is an error in the punch motor. (punch unit)
The puncher does not detect the punching home position after the motor has stopped (initial operation).
Remedy: Check the punch home position sensor, horizontal registration motor, and punch driver PCB; then, turn off and then on the main power.

Code: E591-8001

Description: There is an error in the punch dust sensor. (punch unit)
There is an error in the light.
Remedy: Turn off and then on the main power.

Code: E591-8002

Description: There is an error in the punch dust sensor. (punch unit)
There is an error in the light-receiving voltage without emission of light.
Remedy: Turn off and then on the main power.

Code: E592-8001

Description: There is an error in the punch horizontal registration sensor. (punch unit)
There is an error in the light-receiving voltage at time of light emission. (trailing edge sensor)
Remedy: Turn off and then on the main power.

Code: E592-8002

Description: There is an error in the punch horizontal registration sensor. (punch unit)
There is an error in the light-receiving voltage without emission of light. (trailing edge sensor)
Remedy: Turn off and then on the main power.

Code: E592-8003

Description: There is an error in the punch horizontal registration sensor. (punch unit)
There is an error in the light-receiving voltage with emission of light. (horizontal registration sensor 1)
Remedy: Turn off and then on the main power.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie