• Code: E012-0002
• Description: Error in activation of motor Y
  When 2.5 sec passed after activation of the yellow drum motor, the cycle of drum motor speed detection signal does not become its specified value.
• Causes: Error in drum motor, error in DC controller PCB.
• Remedy: - Replacement of drum motor - Replacement of DC controller PCB

• Code: E012-0003
• Description: Error in activation of motor Y
  After the yellow drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
• Causes: Error in drum motor, error in DC controller PCB.
• Remedy: - Replacement of drum motor - Replacement of DC controller PCB

• Code: E012-0004
• Description: Error in activation of motor M
  When 2.5 sec passed after activation of the magenta drum motor, the cycle of drum motor speed detection signal does not become its specified value.
• Causes: Cause Error in drum motor, error in DC controller PCB.
• Remedy: - Replacement of drum motor - Replacement of DC controller PCB

• Code: E012-0005
• Description: Error in activation of motor M
  After the magenta drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
• Causes: Error in drum motor, error in DC controller PCB.
• Remedy: - Replacement of drum motor - Replacement of DC controller PCB

• Code: E012-0006
• Description: Error in activation of motor C
  Description When 2.5 sec passed after activation of the cyan drum motor, the cycle of the drum motor speed detection signal does not become its specified value.
• Causes: Error in drum motor, error in DC controller PCB.
• Remedy: - Replacement of drum motor - Replacement of DC controller PCB

• Code: E012-0007
• Description: Error in activation of motor C
  After the cyan drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
• Causes: Error in drum motor, error in DC controller PCB.
• Remedy: - Replacement of drum motor - Replacement of DC controller PCB

• Code: E012-0008
• Description: Error in activation of motor Bk
  When 2.5 sec passed after activation of the black drum motor, the cycle of the drum motor speed detection signal does not become its specified value.
• Causes: Error in drum motor, error in DC controller PCB.
• Remedy: - Replacement of drum motor - Replacement of DC controller PCB

• Code: E012-0009
• Description: Error in activation of motor Bk
  After the black drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
• Causes: Error in drum motor, error in DC controller PCB.
• Remedy: - Replacement of drum motor - Replacement of DC controller PCB