Mã lỗi Canon iRC2050 — Trang 6/17
Code:
Tất cả lỗi (131)
E000-0021
E000-0031
E000-0040
E000-0050
E000-01
E000-02
E000-03
E004-01
E004-02
E005
E006-0001
E010-0001
E010-0002
E010-0003
E012
E013-0001
E013-0002
E014-
E014-0001
E014-0002
E014-0003
E014-0004
E014-0009
E020
E025-0101
E025-0201
E025-0301
E025-0401
E032
E041-0001
E041-0002
E043
E051-0001
E070-
E070-0001
E073-0001
E074-0001
E196
E197
E202
E203
E211
E215
E216
E217
E218
E219
E240
E243
E244
E351
E401
E402
E404
E411
E500
E503-0003
E504-0004
E505-0001
E510
E512-0001
E512-0002
E525
E530
E530-0001
E530-0002
E531
E531-0001
E531-0002
E532-0001
E532-0002
E535-0001
E535-0002
E535-0003
E540-0001
E540-0002
E540-0003
E584-0001
E584-0002
E584-0003
E5F0-0001
E5F0-0002
E5F1-0001
E5F2-0001
E5F2-0002
E5F3-0001
E5F3-0002
E5F4-0001
E5F4-0002
E5F5-0001
E5F5-0002
E5F6-0001
E5F6-0002
E5F6-0003
E5F6-0004
E5F6-0005
E5F8-0001
E5F8-0002
E5F8-0003
E5F9-0001
E5F9-0002
E5F9-0003
E621
E624
E625
E626
E627
E628
E629
E677-0001
E677-0002
E677-0004
E677-0080
E677-0101
E710
E711
E712
E717
E800-0001
E800-0002
E800-0003
E800-0004
E805-0001
E805-0002
E805-0003
E805-0004
E805-0005
E805-0006
E805-0007
E809
E810
Description: After scanning an original, the mirror mount does not return to the home position within a specific period of time. The home position is detected while the mirror base is moving.
Causes: The scanner motor malfunctions.
Description: The thermistor reading is 0°C while the temperature is controlled to 70°C.
Causes: The scanning lamp thermistor has an open circuit.
Description: The thermistor reading is 170°C or higher.
Causes: The scanning lamp thermistor has an open circuit.
Description: The intensity sensor does not detect light 10 sec after the scanning lamp is turned on.
Causes: The scanning lamp is faulty. The light intensity sensor is faulty.
Description: The temperature reading is not 70°C or higher 3 min after control to 70°C is started.
Causes: The scanning lamp heater is faulty.
Description: The fluorescent lamp current does not flow within a specific period of time after the ON signal has been received.
Causes: The scanning lamp is not mounted. The filament is broken.
Description: The thermistor reading is 150°C or higher while the scanning lamp is on
Causes: The scanning lamp has reached the end of its life.
Description: An error has occurred in the communication between CPUs of the reader controller PCB and the system controller PCB.
Causes: An error has occurred in the communication between CPUs of the reader controller PCB and the system controller PCB.