Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC2550 — Trang 14/27

Code: E537-8001

Description: Rear alignment error Finisher-Y1, Saddle Finisher-Y2
The HP sensor fails to be OFF after the swing motor rotates for a specific period of time.
Remedy: Replace the rear adjuster plate HP sensor (PI37) , Replace the rear adjuster plate motor (M34)

Code: E537-8002

Description: Front alignment error Finisher-Z1
The HP sensor fails to be OFF within 1000ms after the front adjuster plate starts to move from its HP.
Remedy: Replace the front adjuster plate HP sensor (SR3) , Replace the front adjuster plate motor (M3) , Replace the adjuster plate drive belt

Code: E537-8002

Description: Rear alignment error Finisher-Y1, Saddle Finisher-Y2
The HP sensor fails to be ON after the swing motor rotates for a specific period of time.
Remedy: Replace the rear adjuster plate HP sensor (PI37) , Replace the rear adjuster plate motor (M34)

Code: E540-8001

Description: Upper tray up/down error Finisher-Y1, Saddle Finisher-Y2
The upper tray up/down motor clock is abnormal.
Remedy: Replace the shift motor (M37) of the tray 1, Replace the shift area sensor PCB of the tray 1

Code: E540-8002

Description: Stack tray up/down error Finisher-Z1
Paper surface detection fails to end within 1000ms.
Remedy: Replace the stack tray top paper sensor (SR9) , Replace the stack tray bottom paper sensor (SR10) , Replace the stack tray upper limit sensor (SR13) , Replace the stack tray lower limit sensor (SR12) , Replace the stack tray shift motor (M7)

Code: E540-8002

Description: Upper tray up/down error Finisher-Y1, Saddle Finisher-Y2
Area is abnormal.
Remedy: Replace the shift motor (M37) of the tray 1, Replace the shift area sensor PCB of the tray 1

Code: E540-8003

Description: Stack tray up/down error Finisher-Z1
Encoder lock within 200ms fails to reach 10pulse during paper surface detection.
Remedy: Replace the stack tray top paper sensor (SR9) , Replace the stack tray bottom paper sensor (SR10) , Replace the stack tray upper limit sensor (SR13) , Replace the stack tray lower limit sensor (SR12) , Replace the stack tray shift motor (M7)

Code: E540-8003

Description: Upper tray up/down error Finisher-Y1, Saddle Finisher-Y2
The safety switch is activated.
Remedy: Replace the shift motor (M37) of the tray 1, Replace the shift area sensor PCB of the tray 1
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie