• Code: E532-8001
• Description: Staple unit shift error Finisher-Y1, Saddle Finisher-Y2
  The HP sensor fails to be OFF after the staple shift motor rotates for a specific period of time.
• Remedy: Replace the stapler shift HP sensor (PI50) , Replace the stapler shift motor (M35)

• Code: E532-8002
• Description: Staple unit shift error Finisher-Z1
  The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from its HP.
• Remedy: Replace the stapler slide HP sensor (SR6) , Replace the stapler slide motor (M8)

• Code: E532-8002
• Description: Staple unit shift error
  The HP sensor fails to be ON after the stapler shift motor rotates for a specific period of time.
• Remedy: Replace the stapler shift HP sensor (PI50) , Replace the stapler shift motor (M35)

• Code: E535-8001
• Description: Swing error
  The HP sensor fails to be ON within 2000ms after the swing arm starts to move to its HP.
• Remedy: Check on operation of the stack delivery motor swing mechanism, Replace the swing cam HP sensor (SR7) , Replace the swing cam motor (M5)

• Code: E535-8001
• Description: Swing error Finisher-Y1, Saddle Finisher-Y2
  The HP sensor fails to be OFF after the swing motor rotates for a specific period of time.
• Remedy: Replace the swing HP sensor (PI35) , Replace the swing motor (M36)

• Code: E535-8002
• Description: Swing error Finisher-Z1
  The HP sensor fails to be OFF within 1000ms after the swing arm starts to move from its HP
• Remedy: Check on operation of the stack delivery motor swing mechanism, Replace the swing cam HP sensor (SR7) , Replace the swing cam motor (M5)

• Code: E535-8002
• Description: Swing error
  The HP sensor fails to be ON after the swing motor rotates for a specific period of time.
• Remedy: Replace the swing HP sensor (PI35) , Replace the swing motor (M36)

• Code: E537-8001
• Description: Front alignment error Finisher-Z1
  The HP sensor fails to be ON within 2000ms after the front adjuster plate starts to move to its HP.
• Remedy: Replace the front adjuster plate HP sensor (SR3) , Replace the front adjuster plate motor (M3) , Replace the adjuster plate drive belt