• Code: E530-0002
• Description: Front alignment error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be ON after the front job motor rotates for a specific period of time.
• Remedy: Replace the front adjuster plate HP sensor (PI36) , Replace the front adjuster plate motor (M33)

• Code: E531-0001
• Description: Staple error Finisher-P1
  The HP sensor fails to be ON within 500ms after the staple motor starts to drive in the reverse direction to recover from a staple jam.
• Remedy: Replace the stapling HP sensor (SR18) , Replace the staple motor (M9)

• Code: E531-0001
• Description: Staple error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be OFF after the staple motor rotates for a specific period of time.
• Remedy: Replace the staple HP sensor (PI50) , Replace the staple motor (M41)

• Code: E531-0002
• Description: Staple error Finisher-P1
  The HP sensor fails to be OFF within 500ms after the staple motor starts to drive.
• Remedy: Replace the stapling HP sensor (SR18) , Replace the staple motor (M9)

• Code: E531-0002
• Description: Staple error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be ON after the staple motor rotates for a specific period of time.
• Remedy: Replace the staple HP sensor (PI50) , Replace the staple motor (M41)

• Code: E532-0001
• Description: Staple unit shift error Finisher-P1
  The HP sensor fails to be ON within 11000ms after the staple unit starts to move to the stapling HP.
• Remedy: Replace the stapler slide HP sensor (SR6) , Replace the stapler slide motor (M8)

• Code: E532-0001
• Description: Staple unit shift error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be OFF after the staple shift motor rotates for a specific period of time.
• Remedy: Replace the stapler shift HP sensor (PI50) , Replace the stapler shift motor (M35)

• Code: E532-0002
• Description: Staple unit shift error Finisher-P1
  The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from its HP.
• Remedy: Replace the stapler slide HP sensor (SR6) , Replace the stapler slide motor (M8)