Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC2880F — Trang 2/27

Code: E012-0000

Description: Drum/ITB motor error
Lock of the motor fails to be detected 3 sec or more after the motor starts to operate.
Remedy: Check on connection of the connector, Replace the motor

Code: E013-0001

Description: Error in the waste toner motor
Detects the fault in the waste toner motor
Remedy: Replace the waste toner motor.

Code: E013-0002

Description: Error in the waste toner motor
Indicates that the waste toner motor does not rotate due to the open circuit.
Remedy: Replace the waste toner motor. Replace the DC controller PCB.

Code: E015-0000

Description: Error in the registration/multifeeder motor
Indicates that the signal indicates the motor rotates with the target speed is not sent to the port after passing more than 3 sec from the startup of the motor.
Remedy: Check on connection of the connector, Replace the motor

Code: E020-0010

Description: Error in the developing assembly (toner fault: ATR error)
Indicates that the patch level is higher than the upper limit of the target although setting it as the minimum when initializing Yellow ATR.
Remedy: Clean the ATR sensor window. Check the mounting of the developing assembly. Check the ATR sensor open circuit. Replace the ATR sensor.

Code: E020-0011

Description: Error in the developing assembly (toner fault: ATR error)
Indicates that the patch level is higher than the upper limit of the target although setting it as the minimum when initializing Magenta ATR.
Remedy: Clean the ATR sensor window. Check the mounting of the developing assembly. Check the ATR sensor open circuit. Replace the ATR sensor.

Code: E020-0012

Description: Error in the developing assembly (toner fault: ATR error)
Indicates that the patch level is higher than the upper limit of the target although setting it as the minimum when initializing Cyan ATR.
Remedy: Clean the ATR sensor window. Check the mounting of the developing assembly. Check the ATR sensor open circuit. Replace the ATR sensor.

Code: E020-0013

Description: Error in the developing assembly (toner fault: ATR error)
Indicates that the patch level is higher than the upper limit of the target although setting it as the minimum when initializing Black ATR.
Remedy: Clean the ATR sensor window. Check the mounting of the developing assembly. Check the ATR sensor open circuit. Replace the ATR sensor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie