Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC3100 — Trang 9/27

Code: E100-0004

Description: BD error
Phase lock of the BD phase control fails to be executed 6 sec after the laser scanner motor starts to operate.
Remedy: Check on connection between the laser scanner unit and the DC controller PCB, Check on 24V line fuse, Replace the laser scanner unit

Code: E110-0001

Description: Operation error of the laser scanner motor
Speed lock of the FG speed control fails to be executed 5 sec after the laser scanner motor starts to operate.
Remedy: Check on connection between the laser scanner unit and the DC controller PCB, Check on 24V line fuse, Replace the laser scanner unit

Code: E202-0001

Description: CIS unit HP detection error
The HP sensor fails to be ON after the CIS unit moves backward for a specific distance or more.
Remedy: Disconnect and then connect the connector, Replace the scanner HP sensor, Replace the scanner motor, Replace the reader controller PCB

Code: E202-0002

Description: CIS unit HP detection error
The HP sensor fails to be OFF after the CIS unit moves forward for a specific distance or more.
Remedy: Disconnect and then connect the connector, Replace the scanner HP sensor, Replace the scanner motor, Replace the reader controller PCB

Code: E225-0001

Description: CIS light quantity error
Normal light-up of the lamp fails to be confirmed at the time of power-on and shading correction when a job starts.
Remedy: Disconnect and then connect the connector, Replace the document lamp (xenon tube), Replace the CIS, Replace the inverter PCB, Replace the reader controller PCB

Code: E227-0001

Description: Power supply error in the reader unit
2 4V port is off at power-on.
Remedy: Disconnect and connect the power supply connector, Replace the power supply

Code: E227-0002

Description: Power supply error in the reader unit
24V port is off when a job starts.
Remedy: Disconnect and connect the power supply connector, Replace the power supply

Code: E227-0003

Description: Power supply error in the reader unit
24V port is off when a job terminates.
Remedy: Disconnect and connect the power supply connector, Replace the power supply
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie