Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC3170 — Trang 16/27

Code: E537-0002

Description: Rear alignment error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be ON after the swing motor rotates for a specific period of time.
Remedy: Replace the rear adjuster plate HP sensor (PI37) , Replace the rear adjuster plate motor (M34)

Code: E540-0001

Description: Upper tray up/down error
The upper tray up/down motor clock is abnormal.
Remedy: Replace the shift motor (M37) of the tray 1, Replace the shift area sensor PCB of the tray 1

Code: E540-0002

Description: Stack tray up/down error Finisher-P1
Paper surface detection fails to end within 1000ms.
Remedy: Replace the stack tray top paper sensor (SR9) , Replace the stack tray bottom paper sensor (SR10) , Replace the stack tray upper limit sensor (SR13) , Replace the stack tray lower limit sensor (SR12) , Replace the stack tray shift motor (M7)

Code: E540-0002

Description: Upper tray up/down error
Area is abnormal.
Remedy: Replace the shift motor (M37) of the tray 1, Replace the shift area sensor PCB of the tray 1

Code: E540-0003

Description: Stack tray up/down error Finisher-P1
Encoder lock within 200ms fails to reach 10pulse during paper surface detection.
Remedy: Replace the stack tray top paper sensor (SR9) , Replace the stack tray bottom paper sensor (SR10) , Replace the stack tray upper limit sensor (SR13) , Replace the stack tray lower limit sensor (SR12) , Replace the stack tray shift motor (M7)

Code: E540-0003

Description: Upper tray up/down error
The safety switch is activated.
Remedy: Replace the shift motor (M37) of the tray 1, Replace the shift area sensor PCB of the tray 1

Code: E540-0004

Description: Stack tray up/down error Finisher-P1
Outputs of the top paper sensor, bottom paper sensor, tray upper limit sensor, and tray lower limit sensor have abnormality during paper surface detection.
Remedy: Replace the stack tray top paper sensor (SR9) , Replace the stack tray bottom paper sensor (SR10) , Replace the stack tray upper limit sensor (SR13) , Replace the stack tray lower limit sensor (SR12) , Replace the stack tray shift motor (M7)

Code: E542-0001

Description: Lower tray up/down error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The lower tray up/down motor clock is abnormal.
Remedy: Replace the shift motor (M38) of the tray 2, Replace the shift area sensor PCB of the tray 2
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie