Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC3170F — Trang 12/27

Code: E400-0003

Description: Feeder communication error
Reception interrupt error
Remedy: Check on connection between the ADF controller PCB and the main controller PCB (sub), Replace the ADF controller PCB, Replace the main controller PCB (sub)

Code: E490-0001

Description: Model error
Feeder for other model is detected.
Remedy: Connect an appropriate feeder

Code: E500-0001

Description: Finisher communication error
Communication error is detected between the main body and the finisher for specific times and specific period of time.
Remedy: Check on connection between the DC controller PCB and the finisher controller PCB, Replace the finisher controller PCB, Replace the DC controller PCB

Code: E503-0002

Description: Finisher internal communication error Finisher-P1
Communication error between the finisher and the saddle unit
Remedy: Check on connection between the saddle stitcher controller PCB and the finisher controller PCB, Replace the finisher controller PCB, Replace the saddle stitcher controller PCB

Code: E503-0003

Description: Finisher internal communication error Finisher-P1
Communication error between the finisher and the puncher unit
Remedy: Check on connection between the puncher controller PCB and the finisher controller PCB, Replace the finisher controller PCB, Replace the puncher controller PCB

Code: E505-0001

Description: Finisher backup memory error
Data stored in the backup memory is abnormal.
Remedy: Check on connection between the DC controller PCB and the finisher controller PCB, Replace the finisher controller PCB, Replace the DC controller PCB

Code: E505-0002

Description: Finisher backup memory error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
Abnormality of puncher unit EEPROM data
Remedy: Check on connection between the puncher controller PCB and the finisher controller PCB, Replace the finisher controller PCB, Replace the puncher controller PCB

Code: E514-0001

Description: Stack delivery error Finisher-P1
The HP sensor fails to be ON within 1500ms after the return belt starts to move to its HP.
Remedy: Check on a drive of the stack retaining roller, Replace the return belt U-turn HP sensor (SR5) , Replace the stack delivery motor (M2)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie