Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC3220G — Trang 14/19

Code: E5F6-0003

Description: There is a fault in stapling by the saddle paper pushing plate. Saddle Unit
The paper pushing plate motor (M8S) or the paper pushing plate leading edge position sensor (PI15S) is faulty. The paper pushing plate leading edge position sensor does not go OFF when the paper pushing plate motor has been driven for 80 msec.

Code: E5F6-0004

Description: There is a fault in stapling by the saddle paper pushing plate. Saddle Unit
The paper pushing plate motor (M8S) or the paper pushing plate motor clock sensor (PI1S) is faulty. The number of detection pulses of the paper pushing plate motor clock sensor has dropped below a specific value.

Code: E5F6-0005

Description: There is a fault in stapling by the saddle paper pushing plate. Saddle Unit
The paper pushing plate motor (M8S) or the paper pushing plate leading edge position sensor (PI15S) is faulty. The paper pushing plate leading edge positioning sensor does not go ON when the paper pushing plate motor has been driven for 0.3 sec or more.

Code: E5F8-0001

Description: There is a fault in the saddle connector. Saddle Unit
The connector of the guide home position sensor (PI13S) is faulty. The connector of the guide home position sensor has been identified to have been disconnected.

Code: E5F8-0002

Description: There is a fault in the saddle connector. Saddle Unit
The connector of the paper pushing plate home position sensor (PI14S) is faulty. The connector of the paper pushing plate home position sensor is identified to have been disconnected.

Code: E5F8-0003

Description: There is a fault in the saddle connector. Saddle Unit
The connector of the paper pushing plate leading edge position sensor (PI15S) is faulty. The connector of the paper pushing plate position sensor is identified to have been disconnected.

Code: E5F9-0001

Description: There is a fault in the saddle switch. Saddle Unit
The inlet cover switch (MS1S), front cover switch (MS2S), or delivery cover switch (MS3S) is faulty. The inlet cover switch is identified to be open for 1 sec or more after the start of initial rotation or of printing in the host machine with any of the following sensor identifying the cover to be closed: • inlet cover sensor (PI9S) • front cover open/closed sensor (PI2S) • delivery cover sensor (PI3S)

Code: E5F9-0002

Description: There is a fault in the saddle switch. Saddle Unit
The front cover switch (MS2S) or the delivery cover switch (MS3S) is faulty. The front cover switch is identified to be open for 1 sec or more after the start of initial rotation or of printing in the host machine with any of the following sensors identifying the cover to be closed: • inlet cover sensor (PI9S) • front cover open/closed sensor (PI2S) • delivery cover sensor (PI3S)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie