• Code: E5F6-0003
• Description: There is a fault in stapling by the saddle paper pushing plate. Saddle Unit
  The paper pushing plate motor (M8S) or the paper pushing plate leading edge position sensor (PI15S) is faulty. The paper pushing plate leading edge position sensor does not go OFF when the paper pushing plate motor has been driven for 80 msec.

• Code: E5F6-0004
• Description: There is a fault in stapling by the saddle paper pushing plate. Saddle Unit
  The paper pushing plate motor (M8S) or the paper pushing plate motor clock sensor (PI1S) is faulty. The number of detection pulses of the paper pushing plate motor clock sensor has dropped below a specific value.

• Code: E5F6-0005
• Description: There is a fault in stapling by the saddle paper pushing plate. Saddle Unit
  The paper pushing plate motor (M8S) or the paper pushing plate leading edge position sensor (PI15S) is faulty. The paper pushing plate leading edge positioning sensor does not go ON when the paper pushing plate motor has been driven for 0.3 sec or more.

• Code: E5F8-0001
• Description: There is a fault in the saddle connector. Saddle Unit
  The connector of the guide home position sensor (PI13S) is faulty. The connector of the guide home position sensor has been identified to have been disconnected.

• Code: E5F8-0002
• Description: There is a fault in the saddle connector. Saddle Unit
  The connector of the paper pushing plate home position sensor (PI14S) is faulty. The connector of the paper pushing plate home position sensor is identified to have been disconnected.

• Code: E5F8-0003
• Description: There is a fault in the saddle connector. Saddle Unit
  The connector of the paper pushing plate leading edge position sensor (PI15S) is faulty. The connector of the paper pushing plate position sensor is identified to have been disconnected.

• Code: E5F9-0001
• Description: There is a fault in the saddle switch. Saddle Unit
  The inlet cover switch (MS1S), front cover switch (MS2S), or delivery cover switch (MS3S) is faulty. The inlet cover switch is identified to be open for 1 sec or more after the start of initial rotation or of printing in the host machine with any of the following sensor identifying the cover to be closed: • inlet cover sensor (PI9S) • front cover open/closed sensor (PI2S) • delivery cover sensor (PI3S)

• Code: E5F9-0002
• Description: There is a fault in the saddle switch. Saddle Unit
  The front cover switch (MS2S) or the delivery cover switch (MS3S) is faulty. The front cover switch is identified to be open for 1 sec or more after the start of initial rotation or of printing in the host machine with any of the following sensors identifying the cover to be closed: • inlet cover sensor (PI9S) • front cover open/closed sensor (PI2S) • delivery cover sensor (PI3S)