• Code: E5F6-8005
• Description: Saddle paper push-on error
  The paper pressure plate leading edge sensor fails to be ON after the paper pressure plate motor is driven for 0.3 sec. or more.
• Remedy: Replace the paper pressure plate motor (M8S), Replace the paper pressure plate leading edge sensor (PI15S)

• Code: E5F8-8001
• Description: Saddle connector error
  Disconnection of the guide HP sensor connector is detected.
• Remedy: Disconnect and then connect the guide HP sensor (PI13S) connector

• Code: E5F8-8002
• Description: Saddle connector error
  Disconnection of the paper pressure plate HP sensor connector is detected.
• Remedy: Disconnect and then connect the paper pressure plate HP sensor (PI14S) connector

• Code: E5F8-8003
• Description: Saddle connector error
  Disconnection of the paper pressure plate leading edge sensor connector is detected.
• Remedy: Disconnect and then connect the paper pressure plate leading edge sensor (PI15S) connector

• Code: E5F9-8001
• Description: Saddle switch error
  Open of the inlet cover is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close sensor (PI2S) - Delivery cover sensor (PI3S) Or, the front cover switch (MS2S) or the delivery cover switch (MS3S) is open.
• Remedy: Replace the inlet cover switch (MS1S), Replace the front cover switch (MS2S), Replace the delivery cover switch (MS3S)

• Code: E5F9-8002
• Description: Saddle switch error
  Open of the front cover switch is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close sensor (PI2S) - Delivery cover sensor (PI3S)
• Remedy: Replace the front cover switch (MS2S), Replace the delivery cover switch (MS3S)

• Code: E5F9-8003
• Description: Saddle switch error
  Open of the delivery cover switch is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close sensor (PI2S) - Delivery cover sensor (PI3S) - Delivery cover switch (MS3S)
• Remedy: Replace the inlet cover switch (MS1S), Replace the front cover switch (MS2S), Replace the delivery cover switch (MS3S)

• Code: E601-0000
• Description: Abnormality of image memory
  Communication error of the image memory (SDRAM)
• Remedy: Replace the SDRAM