Mã lỗi Canon iRC5180 — Trang 10/27
Description: 1st mirror stand HP detection trouble
The 1st mirror stand fails to move tTransparency even when it retracts.
Remedy: Replace the optical system HP sensor, optical system motor and reader controller PCB.
Description: 1st mirror stand HP detection trouble
The 1st mirror stand fails to move from HP even when it advances.
Remedy: Replace the optical system HP sensor, optical system motor and reader controller PCB.
Description: Exposure lamp lighting trouble
Light quantity of the exposure lamp has dropped.
Remedy: Clean the white plate. Replace the exposure lamp.
Description: Reader unit power supply error
When the 24 V port is OFF when the power is turned ON.
Remedy: Disconnect and re-connect the power connector. Replace the power supply
Description: Reader unit power supply error
When the 24 V port is OFF when a job is started.
Remedy: Disconnect and re-connect the power connector. Replace the power supply
Description: Reader unit power supply error
When the 24 V port is OFF when a job is finished.
Remedy: Disconnect and re-connect the power connector. Replace the power supply
Description: Reader unit power supply error
When the 24 V port is OFF during load drive.
Remedy: Disconnect and re-connect the power connector. Replace the power supply
Description: Error in communication between main controller and DC controller
Serial communication error
Remedy: Check the connector connections. Check the DC controller PCB (MAISY). Replace the No.1 main controller circuit.