Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC5180N — Trang 22/27

Code: E609-0008

Description: Hard disk trouble
When the HDD fails to reach the prescribed temperature within the prescribed period of time when it is started up
Remedy: Replace with an HDD which is guaranteed to operate at low temperatures.

Code: E609-0009

Description: Hard disk trouble
When the HDD fails to reach the prescribed temperature when its operation is restored from the sleep mode
Remedy: Replace with an HDD which is guaranteed to operate at low temperatures.

Code: E610

Description: Hard disk encryption key failure
Remedy:

Code: E611-0000

Description: Rebooting repeat error due to SRAM failure, etc.
Rebooting error when the SRAM data has been destroyed, the job information saved in the SRAM can no longer be read or when rebooting is otherwise repeated when the power is shut off and restored
Remedy: - Clear the SRAM. - Clear the power shutdown guaranteed jobs.

Code: E674

Description: FAX board communication trouble
Remedy: Check the FAX board and main controller PCB connections. Replace the FAX board. Replace the main controller PCB.

Code: E677

Description: External controller trouble
Remedy: Check the cable connections. Re-install the external controller system

Code: E710-0001

Description: IPC initializing error
When the ready status fails to be established within 3 sec. after the IPC chip started up
Remedy: Check the cable connections.

Code: E711-0001

Description: IPC communication error
When error occurrence was set 4 or more times in the error register of the IPC chip within 1.5 sec.
Remedy: Check the cable connections. Replace the ADF controller PCB. Replace the reader controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie