Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC6800 — Trang 13/33

Code: E043-0001

Description: There is an error in the 3.5K paper deck pickup motor, causing an error signal.
After motor start-up, a lock state is not detected for 1 sec or more. The mechanical load such as on the feeding system is excessive.
Remedy: Turn off and then on the main power.

Code: E051-0001

Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003).
The horizontal registration home position is not detected within a specific period of time.
Remedy: Turn off and then on the main power.

Code: E051-0002

Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003).
The ON edge of the SUS plate is not detected during a search for home position.
Remedy: Turn off and then on the main power.

Code: E051-0003

Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003).
The logical motor position differs between before and after the detection operation.
Remedy: Turn off and then on the main power.

Code: E061-0001

Description: At time of potential control, a specific level of potential is absent. Or, the limiter goes on.
When forming an image, the potential is 10 V or less during initial rotation.
Remedy: Turn off and then on the main power.

Code: E061-0002

Description: At time of potential control, a specific level of potential is absent. Or, the limiter goes on.
At time of potential control, the potential is 10 V or less during initial rotation
Remedy: Turn off and then on the main power.

Code: E061-0003

Description: At time of potential control, a specific level of potential is absent. Or, the limiter goes on.
While the grid bias is being adjusted, a level of potential higher than the grid bias is sampled.
Remedy: Turn off and then on the main power.

Code: E061-0005

Description: At time of potential control, a specific level of potential is absent. Or, the limiter goes on.
The difference in potential between dark and light areas is less than 100 V.
Remedy: Turn off and then on the main power.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie