Description: error in communication with coin vendor/card reader
The card reader that is connected before the power is turned off is not recognized when the paper is turned on.
Remedy: Check the cable, and reset in service mode: COPIER>FUNCTION>CLEAR>ERR.
Description: error in communication with coin vendor/card reader
There is an IPC cable open circuit or an IPC communication error in relation to the card reader that cannot be reset.
Remedy: Check the cable, and reset in service mode: COPIER>FUNCTION>CLEAR>ERR.
Remedy: Turn off the main power, and check the connection of the UFR board; then, turn on the main power. If the machine does not reset, replace the UFR board or the main controller PCB.
Description: There is an error in reader communication.
Although a printer model, the machine is identified as a reader unit at start-up. (A copier model is started up as a printer model when the RAM is initialized.)
Description: There is a printer communication error.
There is a printer communication error. At start-up, the printer is not detected.
Remedy: Turn off the main power, and check the connectors to the DC controller PCB and the main controller PCB, and check the power supply of the printer; then, turn on the main power.
Description: There is a printer communication error.
There is a DDI-P communication error.
Remedy: Turn off the main power, and check the connectors to the DC control PCB and the main controller PCB, and check the power supply of the printer; then, turn on the main power.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.