Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC6800N — Trang 11/33

Code: E020-xxD1

Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction
For INIT control (service mode INISET-*) at time of initial setup, the average of the light Ref values is 462 or lower. The ATR sensor is damaged or has an open circuit. The connector has poor contact.
Remedy: Turn off and then on the main power; then, execute the intermediate transfer belt.

Code: E020-xxD2

Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction
Fore INIT control (service mode INISET-*) at time of initial setup, the average of the patch Sig values is 200 or lower. The patch sensor is damaged or has an open circuit. the connector has poor contact. The primary transfer engagement is faulty. The mounting of the developing assembly is faulty.
Remedy: Turn off and then on the main power; then, execute the intermediate transfer belt.

Code: E020-xxD4

Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction
For INTI control (service mode INISET-*) at time of initial setup, the average of the light Sig values is 800 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. The amount of supply is too high.
Remedy: Turn off and then on the main power; then, execute the intermediate transfer belt.

Code: E020-xxD5

Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction
For INTI control (service mode INISET-*) at time of initial setup, the average of the light Ref values is 562 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact.
Remedy: Turn off and then on the main power; then, execute the intermediate transfer belt.

Code: E020-xxDA

Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction
For INIT control (service mode INISET-*) at time of initial setup, the variation among the 72 night Sig value samplings is 100 or more. The ATR sensor is damaged or has an open circuit. The connector has poor contact. The stirring of toner is faulty.
Remedy: Turn off and then on the main power; then, execute the intermediate transfer belt.

Code: E020-xxDB

Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction
For INIT control (service mode INISET-*) at time of initial setup, the variation among the 72 light Ref samplings is 100 or more. The ATR sensor is damaged or has an open circuit. The connector has poor contact.
Remedy: Turn off and then on the main power; then, execute the intermediate transfer belt.

Code: E020-xxDC

Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction
For INIT control (service mode INISET-*), the average of the patch Sig values is 800 or higher. The patch sensor is damaged or has an open circuit. The connector has poor contact. the primary transfer engagement if faulty. The mounting of the developing assembly is faulty. The amount of supply is too high.
Remedy: Turn off and then on the main power; then, execute the intermediate transfer belt.

Code: E020-xxF1

Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction
The connector or the color toner supply clutch is not connected.
Remedy: Turn off and then on the main power; then, execute ITB cleaning.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie