Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon LBP3460 — Trang 2/3

Code: E003-0001

Description: Fixing low temperature
Causes: The temperature of the sub thermistor shows 35 deg C or below for 1 second continuously after the temperature of the main thermistor exceeds 50 deg C at least once. Cause The sub-thermistor is faulty. The engine controller PCB is faulty. The connector is in poor contact. The harness is faulty.
Remedy: - Replace the fixing film unit. - Replace the engine controller PCB.

Code: E004-0000

Description: Fixing assembly drive assembly circuit error
Causes: Zero cross signal cannot be detected for specified time or longer. Cause Fixing control circuit assembly is faulty.
Remedy: - Replace the engine controller PCB.

Code: E012-0000

Description: Main motor error
Causes: A motor ready state does not start 3 sec or more after the motor has been started. Cause The drum motor is faulty. The engine controller PCB is faulty.
Remedy: - Replace the drum motor. - Replace the engine controller PCB.

Code: E012-0001

Description: Main motor error
Causes: A motor ready state remains for 3 sec or more even though the motor has not been driven. Cause The drum motor is faulty. The engine controller PCB is faulty.
Remedy: - Replace the drum motor. - Replace the engine controller PCB.

Code: E100-0000

Description: BD error
Causes: BD error During constant speed rotation, the cycle of the BD signal deviates for 1 sec or more from a specific cycle.
Remedy: - Replace the laser scanner unit. - Replace the engine controller PCB.

Code: E110-0000

Description: Polygon motor error
Causes: After the /BDI signal has been detected, it is not detected 14 sec later.
Remedy: - Replace the scanner motor.

Code: E110-0001

Description: Polygon motor error
Causes: After the scanner motor has reached as specific revolution, the /BDI signal is not detected within 1.5 sec.
Remedy: - Replace the scanner motor.

Code: E602-0002

Description: HDD error
Causes: Downloading of the controller firmware ends in failure.
Remedy: - Download the controller firmware again. - Replace the video controller board by new one.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie