Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the magenta scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the cyan scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the black scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.
Causes: The scanner failed to be Ready within 3 seconds after start of pseudo BD control.
Remedy: 1. Check that the engine test print is properly printed. 2. Check the FFC between the Main Controller PCB and the Engine Controller PCB. 3. Replace the Main Controller PCB.
Remedy: 1. Replace the Toner Cartridge. 2. Check the harness/connector between the Color Displacement/Density Sensor and the Engine Controller PCB. 3. Replace the Color Displacement/Density Sensor Unit. 4. Replace the Engine Controller PCB. 5. Replace the ITB Unit.