Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon LBP6710i — Trang 7/8

Code: E733 0004

Description: Error in printer communication (undefined command error)
Remedy: 1) Turn OFF and then ON the power. 2) Replace the Engine Controller PCB.

Code: E733 0006

Description: Error in printer communication (unknown communication error)
Remedy: 1) Turn OFF and then ON the power. 2) Replace the Engine Controller PCB.

Code: E740 0002

Description: An invalid MAC address has been detected.
Remedy: 1) Check the Mac address. 2) Write the address to the Mac address. 3) Replace the board.

Code: E740 0004

Description: LAN Controller Chip access error
Remedy: 1) Check around the LAN Chip. 2) Replace the board.

Code: E744 0900

Description: Model code mismatch
Remedy: Change to proper bootable. Check the supported series or model of the firmware, and burn the correct series or model of firmware. Replace the Main Controller Board.

Code: E744 1000

Description: Mismatch of the series or model of the firmware sent at the time of downloading
Remedy: Change to proper bootable. Check the supported series or model of the firmware, and burn the correct series or model of firmware. Replace the Main Controller Board.

Code: E744 1100

Description: Falsification of the Main Controller Board has been detected.
Remedy: Change to proper bootable. Check the supported series or model of the firmware, and burn the correct series or model of firmware. Replace the Main Controller Board.

Code: E748 2012

Description: Failed to rewrite due to no more alternative block of Flash ROM (NAND) available.
Remedy: Replace the Controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie