• Code: E602 0001
• Description: Insufficient HDD capacity
• Remedy: Replace the HDD.

• Code: E602 0002
• Description: Bootable load failure A Bootable CD was not contained. A Bootable CD was damaged.
• Remedy: Burn the Bootable CD again.

• Code: E602 0006
• Description: Bootable load failure A Bootable CD was not contained. A Bootable CD was damaged.
• Remedy: Burn the Bootable CD again.

• Code: E602 0007
• Description: The contents cannot be detected.
• Remedy: Create Bootable again.

• Code: E602 0008
• Description: There is not enough free space in the alternative block of NAND Flash
• Remedy: 1) Start service mode. 2) Clear the error from the service mode menu. 3) Reboot the machine to stop the error code. 4) Export the user information from the old NAND Flash. 5) Replace the Controller Board. (Change the NAND Flash.) 6) Import the user information to the new NAND Flash.

• Code: E602 0009
• Description: The power supply was interrupted due to power failure or disconnection of the power plug. The MEAP area in the Flash ROM (NAND ROM) became read-only and cannot be written. MEAP cannot be started.
• Remedy: Initialize the MEAP area in Flash ROM (NAND ROM) by enabling the MEAP recovery menu from service mode or special management mode and rebooting the machine. Since the installed MEAP applications and their management information are all cleared, MEAP needs to be reinstalled.

• Code: E602 1102
• Description: /APL_MEAP error (The file systemcannot be initialized properly.)
• Remedy:

• Code: E602 1112
• Description: /APL_MEAP error (device access error EROFS)
• Remedy: