Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon LBP7700C — Trang 5/9

Code: E196-0000

Description: Invalid RFU execution requested
Causes: D-con update for the host machine or the optional cassette is not completed.
Remedy:

Code: E196-0001

Description: Invalid RFU execution requested
Causes: D-con update for the optional cassette is not completed.
Remedy:

Code: E198-0000

Description: DC controller memory failure
Causes: A checksum failure is found in the block where specific information of the DC controller PCB is saved. A communication error occurred when reading the specific information of the DC controller PCB from the NVRAM at power-on.
Remedy: If the failure cannot be removed by turning the power OFF/ON, replace the DC controller PCB.

Code: E602-0001

Description: HDD error
Causes: Lack of the HDD capacity The capacity of the HDD installed is smaller than that of the HDD used in the software.
Remedy:

Code: E602-0002

Description: HDD error
Causes: Bootable load failure A Bootable CD was not contained. A Bootable CD was damaged.
Remedy: Burn the Bootable CD again.

Code: E602-0003

Description: HDD error
Causes: HDD access error An error occurred caused by the device or hardware when accessing to the HDD during execution of bootrom. (Damage to the sector / Busy device status, etc.)
Remedy: Turn on the power again.

Code: E602-0006

Description: HDD error
Causes: SubBootable load failure A SubBootable CD was not contained. A SubBootable CD was damaged.
Remedy: Burn the SubBootable CD again.

Code: E602-0007

Description: HDD error
Causes: The contents (ICC-Profile, etc.) could not be detected. (The contents were not contained. The contents were damaged, etc.)
Remedy: Burn the Bootable CD again.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie