Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF515dw — Trang 8/12

Code: E001-0001

Description: Abnormal high temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly (Sub Thermistor) was abnormally high.
Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E003-0000

Description: Abnormal low temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly was abnormally low.
Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E003-0001

Description: Abnormal low temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly (Sub Thermistor) was abnormally low.
Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E004-0000

Description: Error in fixing power supply drive circuit
Causes: The zero cross signal was not detected for the specified period of time or more.
Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E012-0000

Description: Black Drum Motor error
Causes: An error in the initial operation of the Drum Motor was detected.
Remedy: 1. Reconnect the connector of the Main Motor. 2. Replace the Engine Controller PCB.

Code: E012-0001

Description: Black Drum Motor error
Causes: Rotation error of the Drum Motor was detected.
Remedy: 1. Reconnect the connector of the Main Motor. 2. Replace the Engine Controller PCB.

Code: E014-0000

Description: Error in startup of the Main Motor
Causes: Revolution of the Main Motor did not reach the specified value.
Remedy: 1. Check the connector connection between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

Code: E014-0001

Description: Error in startup of the Main Motor
Causes: Revolution of the Main Motor was out of the specified range.
Remedy: 1. Check the connector connection between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie