Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF5940dn — Trang 5/8

Code: E000-0000

Description: Error in temperature rising of Fixing Assembly
Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E001-0000

Description: Abnormal high temperature of Fixing Assembly
It was detected that the temperature of the Fixing Assembly was abnormally high.
Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E003-0000

Description: Abnormal low temperature of Fixing Assembly
It was detected that the temperature of the Fixing Assembly was abnormally low.
Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB.

Code: E004-0000

Description: Error in fixing power supply drive circuit
Failed to detect the zero cross signal for the specified period of time or more.
Remedy: 1. Check the connection of connector between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E014-0000

Description: Error in startup of the Main Motor
Revolution of the Main Motor did not reach the specified value.
Remedy: 1. Check the connection of connector between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

Code: E100-0000

Description: Laser Scanner Assembly error
At the Laser Scanner Unit, BD cycle was not within the specified range.
Remedy: 1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit. 2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit

Code: E196-1000

Description: Main Controller PCB reading/writing error
Error in reading/writing of main program in the Main Controller PCB
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

Code: E196-2000

Description: Main Controller PCB reading/writing error
Error in reading/writing of setting values storage area in the Main Controller PCB
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie