Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF5960dn — Trang 8/8

Code: E766-xxxx

Description: Firmware error
An error due to the controller software occurred so that print could not be proceeded.
Remedy: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the installed engine again.

Code: E804-0004

Description: Controller Fan error
Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time.
Remedy: 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan.

Code: E805-0000

Description: Main Fan error
The Main Fan was locked for a specified consecutive period of time.
Remedy: 1. Check the connection of the Main Fan. 2. Replace the Main Fan.

Code: E808-0000

Description: Failure detection of Low Voltage Power Supply PCB
Printer detected failure of the Low Voltage Power Supply PCB.
Remedy: Replace the Engine Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie