Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF633Cdw — Trang 5/10

Code: E014-0001

Description: Error in startup of the Main Motor
Causes: Revolution of the Main Motor was out of the specified range.
Remedy: 1. Check the connector connection between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

Code: E015-0000

Description: Error in Developing Disengagement Motor
Causes: The engine detected an error in the Developing Disengagement Motor.
Remedy: 1. Check the harnesses/connectors connecting the Developing Disengagement Switch, the Developing Disengagement Solenoid and the Engine Controller PCB. 2. Check that the Developing Disengagement Switch is properly installed. 3. Replace the Developing Disengagement Switch. 4. Replace the Developing Disengagement Solenoid. 5. Replace the Engine Controller PCB.

Code: E015-0001

Description: Cassette 1 lift-up error
Causes: After lift-up of the Lifting Plate of the cassette of the host machine started, ON status of the Lifter Sensor of the cassette of the host machine was not detected within the specified period of time.
Remedy: 1. While the cassette of the host machine is removed, turn ON the power and insert the cassette, then check the operation sound of the motor. When there is operation sound of the motor, check if the Lifting Plate has been lifted up. When the Lifting Plate has been lifted up: 1-1. Check that the Lifter Sensor of the cassette of the host machine is properly installed. 1-2. Check the harness/connector between the Engine Controller PCB and the Lifter Sensor. 1-3. Replace the Lifter Sensor.1-4. Replace the Engine Controller PCB. When the Lifting Plate has not been lifted up: 2-1. Check the condition of the gear at the host machine side (missing teeth, swing). 2-2. Check the harness/connector between the Engine Controller PCB and the Lifter Solenoid of the cassette of the host machine. 2-3. Replace the Lifter Solenoid. 2-4. Replace the Pickup Motor of the cassette of the host machine. 2-5. Replace the Driver PCB. 2-6. Replace the Engine Controller PCB. When there is no operation sound of the motor, check the followings: 3-1. Check the harness/connector between the Engine Controller PCB and the Pickup Motor of the cassette of the host machine. 3-2. Check the condition of the gear at the host machine side (missing teeth, swing). 3-3. Check the Pickup Motor. 3-4. Replace the Driver PCB. 3-5. Replace the Engine Controller PCB.

Code: E015-0002

Description: Cassette 2 lift-up error
Causes: After lift-up of the Lifting Plate of the 1-Cassette Unit started, ON status of the Lifter Sensor of the 1-Cassette Unit was not detected within the specified period of time.
Remedy: 1. While the cassette of the 1-Cassette Unit is removed, turn ON the power and insert the cassette, then check the operation sound of the motor. When there is operation sound of the motor, check if the Lifting Plate has been lifted up. When the Lifting Plate has been lifted up: 1-1. Check that the Lifter Sensor of the Cassette Unit is properly installed. 1-2. Check the harness/connector between the Engine Controller PCB and the Lifter Sensor. 1-3. Replace the Lifter Sensor. 1-4. Replace the Cassette Feeder Driver PCB. 1-5. Replace the Engine Controller PCB. When the Lifting Plate has not been lifted up: 2-1. Check the condition of the gear of the Cassette Unit (missing teeth, swing). 2-2. Check the harness/connector between the Engine Controller PCB and the Lifter Solenoid of the Cassette Unit. 2-3. Replace the Lifter Solenoid. 2-4. Replace the Pickup Motor of the Cassette Unit. 2-5. Replace the Cassette Feeder Driver PCB. 2-6. Replace the Engine Controller PCB. When there is no operation sound of the motor, check the followings: 3-1. Check the harness/connector between the Engine Controller PCB and the Pickup Motor of the Cassette Unit. 3-2. Check the condition of the gear at the Cassette Unit side (missing teeth, swing). 3-3. Replace the Pickup Motor. 3-4. Replace the Cassette Feeder Driver PCB. 3-5. Replace the Engine Controller PCB.

Code: E020-0000

Description: Density Sensor error
Causes: An error in the Density Sensor was detected.
Remedy: 1. Check the remaining toner level. 2. Replace the Toner Cartridge. 3. Check the harness/connector between the Color Displacement/Density Sensor and the Engine Controller PCB. 4. Replace the Color Displacement/Density Sensor. 5. Replace the ITB. 6. Replace the Engine Controller PCB.

Code: E021-1000

Description: Yellow Developing Motor rotation error
Causes: It was judged that the Developing Motor did not rotate.
Remedy: 1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-1001

Description: Magenta Developing Motor rotation error
Causes: It was judged that the Developing Motor did not rotate.
Remedy: 1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-1002

Description: Cyan Developing Motor rotation error
Causes: It was judged that the Developing Motor did not rotate.
Remedy: 1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie