Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF635Cx — Trang 7/10

Code: E100-0000

Description: Yellow scanner area failure
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the yellow scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E100-0001

Description: Magenta scanner area failure
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the magenta scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E100-0002

Description: Cyan scanner area failure
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the cyan scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E100-0003

Description: Black scanner area failure
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the black scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E110-0000

Description: Primary pseudo BD correction error
Causes: The scanner failed to be Ready within 3 seconds after start of pseudo BD control.
Remedy: 1. Check that the engine test print is properly printed. 2. Check the FFC between the Main Controller PCB and the Engine Controller PCB. 3. Replace the Main Controller PCB.

Code: E194-0000

Description: CPR Sensor error
Causes: An error in the CPR Sensor was detected.
Remedy: 1. Replace the Toner Cartridge. 2. Check the harness/connector between the Color Displacement/Density Sensor and the Engine Controller PCB. 3. Replace the Color Displacement/Density Sensor Unit. 4. Replace the Engine Controller PCB. 5. Replace the ITB Unit.

Code: E196-0000

Description: Engine Controller error
Causes: Update of the Engine Controller was failed. (RFU mode right after the startup)
Remedy: 1. Replace the Engine Controller PCB.

Code: E198-0000

Description: Engine Controller memory failure
Causes: Error in the nonvolatile memory on the Engine Controller PCB
Remedy: 1. Turn OFF and then ON the power and check if the symptom occurs again. 2. Replace the Engine Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie