Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF7280 — Trang 7/8

Code: E575-0001

Description: - Stack delivery motor or finisher controller PCB failure
- Stack delivery HP sensor failure
- The stack delivery motor was driven for 2000 ms in the stack delivery direction (HP sensor approach direction), but the stack delivery HP sensor did not turn on.
Remedy: - Check the connector of the stack delivery HP sensor. - Check the connector of the stack delivery motor. - Check the connector of the stack delivery HP sensor. - Replace the stack delivery motor. - Replace the finisher controller PCB.

Code: E575-0002

Description: - Stack delivery motor or finisher controller PCB failure
- Stack delivery HP sensor failure
- The stack delivery motor was driven for 2000 ms in the HP sensor escape direction, but the stack delivery HP sensor did not turn off.
Remedy: - Check the connector of the stack delivery HP sensor. - Check the connector of the stack delivery motor. - Check the connector of the stack delivery HP sensor. - Replace the stack delivery motor. - Replace the finisher controller PCB.

Code: E584-0001

Description: - Shutter drive motor or finisher controller PCB failure
- Shutter open detection sensor failure
- Shutter clutch failure
- The shutter open sensor did not turn on when 1000 ms have lapsed since the shutter unit had performed open operation, resulting in incomplete open operation
Remedy: - Check the connector of the shutter open sensor. - Check the connector of the shutter clutch. - Check the connector of the shutter motor. - Replace the shutter open sensor. - Replace the shutter clutch. - Replace the shutter drive motor. - Replace the finisher controller PCB.

Code: E584-0002

Description: - Shutter drive motor or finisher controller PCB failure
- Shutter open detection sensor failure
- Shutter clutch failure
- The shutter open sensor did not turn off when 1000 ms have lapsed since the
shutter unit had performed close operation, resulting in incomplete close operation.
Remedy: - Check the connector of the shutter open sensor. - Check the connector of the shutter clutch. - Check the connector of the shutter motor. - Replace the shutter open sensor. - Replace the shutter clutch. - Replace the shutter drive motor. - Replace the finisher controller PCB.

Code: E716-0000

Description: Erroneous communication with optional cassette
Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication.
Remedy: - Check the connectors of the optional cassette PCB and DC controller PCB. - Replace the optional cassette PCB for normal connection. - Replace the DC controller PCB.

Code: E719-0000

Description: Erroneous communication with card reader (serial communication)
- Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on).
- A serial communication error has occurred. (The serial communication error cannot be recovered.)
Remedy: - Check the connectors of the card reader and image processor PCB. - Replace the card reader for normal connection. - Replace the image processor PCB.

Code: E719-0002

Description: Erroneous communication with coin vendor (serial communication)
- Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on).
- A serial communication error has occurred. (The serial communication error cannot be recovered.)
Remedy: - Check the connection between the image processor PCB and serial PCB. - Check the connectors of the serial PCB and coin vendor for normal connection. - Replace the serial PCB. - Check the coin vendor. - Replace the image processor PCB.

Code: E733-0000

Description: Erroneous communication between controller and printer
Cannot communicate with the printer at startup.
Remedy: - Check the connectors of the DC controller PCB and image processor PCB for normal connection. - Check the power supply of the printer (Check whether initialization is performed at startup). - Replace the DC controller PCB or image processor PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie