Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF7470 — Trang 6/10

Code: E196-0001

Description: Image processor PCB failure
Error on writing and readout ROM of image processor PCB (mainn ROM).
Remedy: - Putting the switch on/off of the power supply. - Replace the image processor PCB.

Code: E196-0002

Description: Image processor PCB failure
Error on writing and readout ROM of image processor PCB (option ROM).
Remedy: - Putting the switch on/off of the power supply. - Replace the image processor PCB.

Code: E197-0000

Description: Printer engine communication error
Erroneous communication between the DC controller PCB and image processor PCB was detected.
Remedy: - Check the connectors of the DC controller PCB and image processor PCB. - Replace the DC controller PCB for normal connection. - Replace the image processor PCB.

Code: E261-0000

Description: Zero-cross signal error
If failed to detect zero-cross signal cycle of the power supply when initializing. When the input of the zero-signal failed continuously for three seconds while controlling the temperature adjustment.
Remedy: - Replace the power supply PCB. - Replace the DC controller PCB.

Code: E500-0001

Description: Finisher communication error
Data communication could not be performed normally. It has been retried three times in vain.
Remedy: - Check the connectors of the finisher controller PCB and DC controller PCB for normal connection. - Replace the finisher controller PCB. - Replace the DC controller PCB.

Code: E520-0001

Description: - Offset motor or finisher controller PCB failure
- Offset HP sensor failure
- The offset motor was driven for 1000 ms in the HP sensor approach direction, but the offset HP sensor did not turn on.
Remedy: - Check the connector of the offset HP sensor. - Check the connector of the offset motor. - Replace the offset HP sensor. - Replace the offset motor. - Replace the finisher controller PCB.

Code: E520-0002

Description: - Offset motor or finisher controller PCB failure
- Offset HP sensor failure
- The offset motor was driven for 1000 ms in the HP sensor escape direction, but the offset HP sensor did not turn off.
Remedy: - Check the connector of the offset HP sensor. - Check the connector of the offset motor. - Replace the offset HP sensor. - Replace the offset motor. - Replace the finisher controller PCB.

Code: E531-0001

Description: - Staple unit failure
- Staple HP sensor failure
- Finisher controller PCB failure
- The staple home position was not left when 400 ms have lapsed since start of staple operation.
Remedy: - Check the connector of the staple unit. - Replace the staple unit. - Replace the finisher controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie