Mã lỗi Canon NP6045
Description: Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc.
Description: Fuser temperature too high. Same possibilities as E000, as well as shorted wire.
Description: Fuser temperature not rising at correct pace, same possibilities as E000.
Description: Fuser temperature drops. Same as E000.
Description: Fuser problem: AC driver, SSR bad, wire shorted.
Description: Fuser cleaning web, or problem with sensor, lever or connector. Service mode 6 is the probably reset for this.
Description: Fuser feed connector.
Description: Drive problem. Main motor, gears, etc.