Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson AcuLaser C1600 — Trang 2/3

Code: 0500

Description: Fuser warm-up failure
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Change fuser unit. 2 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. Clear key Rotate Toner key Clear key Rotate Toner key. 4. Main switch is turned OFF/ON. 3 Change PRCB. 4 Change DCPU.

Code: 0502

Description: Thermistor open-circuit failure
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. 3 Change fuser unit. 4 Change PRCB. 5 Change DCPU.

Code: 0503

Description: Thermistor resistance failure
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Change fuser unit. 2 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. Clear key Rotate Toner key Clear key Rotate Toner key. 4. Main switch is turned OFF/ON. 3 Change PRCB. 4 Change DCPU.

Code: 0510

Description: Abnormally low fuser temperature
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. 3 Change fuser unit. 4 Change PRCB. 5 Change DCPU.

Code: 0520

Description: Abnormally high fuser temperature
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. 3 Change fuser unit. 4 Change PRCB. 5 Change DCPU.

Code: 0F51

Description: Waste toner full sensor trouble
Causes: Waste toner full sensor (PS7) Printer control board (PRCB)
Remedy: 1 Check the PRCB connector for proper connection and correct as necessary. 2 PS7 sensor check. 3 Change PRCB.

Code: 13C0

Description: Printer control board malfunction
Causes: Printer control board (PRCB)
Remedy: 1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB.

Code: 13DD

Description: Backup data error
Causes: Printer control board (PRCB)
Remedy: 1 Confirm mounting status of EEPROM on the printer control board, and make modification if necessary. 2 Change PRCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie