Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson AcuLaser CX21 — Trang 4/4

Code: E547

Description: Feed Motor Failure
- DRIVE ASSY FEED (Feed Motor) of the Feeder is not rotating at the specified speed.
Causes: • HARNESS-ASSY FEED MAIN • DRIVE ASSY FEED • PWBA TRAY 500 • HARNESS-ASSY FEED 1 • HARNESS ASSY MAIN • PWBA MCU
Remedy: 1 Check of DRIVE ASSY FEED attachment Is DRIVE ASSY FEED attached correctly? Go to Step [2]. Re-attach, and go to step [2]. 2 Continuity check of HARNESS-ASSY FEED MAIN Disconnect P/J437 from PWBA TRAY CONT. Do all of the wiring below have normal continuity? J437-1 . J440-5 J437-2 . J440-4 J437-4 . J440-2 J437-5 . J440-1 Go to Step [3]. Replace HARNESSASSY FEED MAIN. 3 24 VDC power supply check to DRIVE ASSY FEED The voltage of P440-2 . P440-1 on PWBA FEED DRV is 24 VDC? Go to Step [4]. Go to Step [5]. 4 Check of FEED MOTOR START signal The voltage of P440-5 . P440-1 on PWBA FEED DRV is xx VDC when FEED MOTOR START signal is ON? Replace DRIVE ASSY FEED. Go to Step [10]. 5 24 VDC power supply check to PWBA TRAY 500 The voltage of P435-9/10 . P435-7/8 on PWBA TRAY 500 is 24 VDC? Replace PWBA TRAY 500. Go to Step [6]. 6 Continuity check of HARNESS-ASSY FEED 1 Disconnect P/J435 from PWBA TRAY CONT. Do all of the wiring below have normal continuity? J435-10 . P608-1 (connector on Feeder to be connected to the printer) J435-9 . P608-2 J435-8 . P608-3 J435-7 . P608-4 Go to Step [7]. Replace PWBA TRAY 500. 7 Continuity check of HARNESS ASSY MAIN Disconnect P/J421 from PWBA MCU. Do all of the wiring below have normal continuity? J421-1 . J608-10 (connector on the printer to connect Feeder) J421-2 . J608-9 J421-3 . J608-8 J421-4 . J608-7 Go to Step [8]. Repair broken or shorted part. 8 24 VDC power supply check to PWBA MCU The voltage of P410-5/6 . P410-7/8 on PWBA MCU is 24 VDC? Replace PWBA MCU. Go to Step [9]. 9 Continuity check of HARNESS ASSY MAIN Disconnect P/J410 from PWBA MCU and P/ J502 from LV/HVPS. Do all of the wiring below have normal continuity? J410-5 . J502-5 J410-6 . J502-6 J410-7 . J502-7 J410-8 . J502-8 Replace LV/ HVPS. Repair broken or shorted part.

Code: E998

Description: Engine Communication Error
- Acommunication error between the controller and the PWBA MCU via the video I/F occured
Causes: • FFC-ASSY ESS • PWBA MCU • BOARD ASSY., MAIN
Remedy: 1 Check if the firmware version of the PWBA MCU Check the firmware version of the PWBA MCU. Is the version latest ? Go to Step [2]. Update the firmware. 2 Check if the firmware version of the printer controller Check the firmware version of the printer controller Is the version latest ? Go to Step [3]. Update the firmware. 3 Continuity check of FFC-ASSY ESS 1. Disconnect the P/J400 on the PWBA MCU. 2. Disconnect the CN601 on the BOARD ASSY., MAIN 3. Check each wiring for continuity. Do all of the wiring have continuity ? Go to Step [4]. Replace the FFC-ASSY ESS. 4 Replacement of the BOARD ASSY., MAIN Replace the BOARD ASSY., MAIN. Does the error occur ? Replace the PWBA MCU. End of procedure
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie