Mã lỗi Epson Stylus CX9300F — Trang 2/3
Code:
Tất cả lỗi (20)
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Code:
09
Display: Ink cartridge cover is open. Open the scanner unit and close the ink cartridge cover.
Description: Ink cartridge cover open error
Causes: Ink replacement was attempted with the Ink Cartridge Cover open.
Code:
10
Display: Paper out. Load paper and press the Start button.
Description: Paper out error
Causes: Failure to load paper to print.
Code:
11
Display: Replace ink cartridge before cleaning print head.
Description: Head cleaning (Ink low error)
Causes: Head cleaning was attempted in the Ink low status.
Code:
12
Display: Cannot recognize the device.
Description: DSC Direct error
Causes: A device not supported is connected to the port for the connection of external memory devices. The DSC demands the current larger than mechanical limit
Code:
13
Display: Cannot recognize the memory card or disk.
Description: Memory card error
Causes: That memory card is not available with this unit. Or no image can be found in that card when memory card print is started.
Code:
14
Display: There is no index sheet or it is not positioned correctly. Check it and try again.
Description: Index sheet error 1 (No index sheet)
Causes: The direction of order sheet is opposite. No index sheet is recognized correctly.
Code:
15
Display: Photos are not selected or the ovals are marked incorrectly. Please correct and try again.
Description: Index sheet error 2 (Incorrect marking)
Causes: When there is a mismatch in the content of the order sheet (When it is not marked though the selection is necessary.)
Code:
16
Display: No photos could be recognized. Make sure the photos are positioned correctly. For details, see your manual.
Description: Pre-scanning error (photo)
Causes: Photos cannot be recognized.