Description: CR life error
The CR scan path counter has reached a predetermined level. (The end of life of the Ink Supply Tube)
Remedy: Replace the Ink Supply Tube (INK, SYSTEM, ASSY) and reset the counter using the Adjustment Program. In addition, check the statuses of the CR motor (MOTOR ASSY., CR), the driven pulley, the Carriage Unit, and the Head FFC, if any abnormal noise or wear is found, replace the corresponding part(s) along with the Ink Supply Tube.
Description: CR lock error
The CR encoder failed to read the CR scale during a predetermined time period. The carriage unit does not operate due to a CR motor failure or some reasons.
Remedy: Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR scale (SCALE, CR).
Description: CR reverse error
An abnormal operation (reveres movement) of the carriage was detected a predetermined number of times.
Remedy: Check the CR scale (SCALE, CR) for incorrect attachment, scratch, dirt, and fix any abnormality. Replace the CR scale (SCALE, CR). Replace the CR encoder (BOARD ASSY., ENCODER, CR).
Description: CR overspeed error
The carriage moved faster than a designated level.
Remedy: Check the CR scale (SCALE, CR) for incorrect attachment, scratch, dirt, and fix any abnormality. Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR motor (MOTOR ASSY., CR). Replace the main board (BOARD ASSY., MAIN).
Description: Duty over error
An abnormal load is applied to the CR motor.
Remedy: Check the carriage shaft surface for any foreign matters, and remove it if any. Check that the carriage shaft and the contact points between the carriage unit and the main frame are properly lubricated. Replace the CR motor (MOTOR ASSY., CR).
Description: CR home position detection error
The carriage home position cannot be detected because the Pump Cap unit does not work to unlock the carriage at power-on.
Remedy: Replace the Pump Cap unit (PUMP, CAP ASSY.) and clear the usage counter using the Adjustment Program.