Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson Stylus Pro 3850

Code: 1101

Description: CR life error
The CR scan path counter has reached a predetermined level. (The end of life of the Ink Supply Tube)
Remedy: Replace the Ink Supply Tube (INK, SYSTEM, ASSY) and reset the counter using the Adjustment Program. In addition, check the statuses of the CR motor (MOTOR ASSY., CR), the driven pulley, the Carriage Unit, and the Head FFC, if any abnormal noise or wear is found, replace the corresponding part(s) along with the Ink Supply Tube.

Code: 1120

Description: CR lock error
The CR encoder failed to read the CR scale during a predetermined time period. The carriage unit does not operate due to a CR motor failure or some reasons.
Remedy: Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR scale (SCALE, CR).

Code: 1121

Description: CR reverse error
An abnormal operation (reveres movement) of the carriage was detected a predetermined number of times.
Remedy: Check the CR scale (SCALE, CR) for incorrect attachment, scratch, dirt, and fix any abnormality. Replace the CR scale (SCALE, CR). Replace the CR encoder (BOARD ASSY., ENCODER, CR).

Code: 1122

Description: CR overspeed error
The carriage moved faster than a designated level.
Remedy: Check the CR scale (SCALE, CR) for incorrect attachment, scratch, dirt, and fix any abnormality. Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR motor (MOTOR ASSY., CR). Replace the main board (BOARD ASSY., MAIN).

Code: 1123

Description: Duty over error
An abnormal load is applied to the CR motor.
Remedy: Check the carriage shaft surface for any foreign matters, and remove it if any. Check that the carriage shaft and the contact points between the carriage unit and the main frame are properly lubricated. Replace the CR motor (MOTOR ASSY., CR).

Code: 1124

Description: Drive timeover error
One cycle movement cannot be finished during a predetermined time period after power-on.
Remedy: Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR scale (SCALE, CR). Replace the CR motor (MOTOR ASSY., CR).

Code: 1125

Description: CR home position detection error
The carriage home position cannot be detected because the Pump Cap unit does not work to unlock the carriage at power-on.
Remedy: Replace the Pump Cap unit (PUMP, CAP ASSY.) and clear the usage counter using the Adjustment Program.

Code: 1126

Description: CR lock release error
The carriage unit cannot be unlocked.
Remedy: Replace the Pump Cap unit (PUMP, CAP ASSY.) and clear the usage counter using the Adjustment Program.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie