Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson Stylus Pro 4900 — Trang 6/18

Code: 1523

Description: Roll Sensor error
Causes: Cannot detect the end of the roll paper if it is fed. • Connection failure of the Roll Sensor. • Roll Sensor failure
Remedy: Replace the Roll Sensor.

Code: 152A

Description: Roll Feeding Motor overload error
Causes: The electric current flowing when driving the motor is irregularly large. • Roll Feeding Motor Assy cable is damaged. • Irregular load • Roll Feeding Motor Assy encoder failure • Roll Feeding Motor failure
Remedy: Replace the Roll Feeding Motor Assy.

Code: 152B

Description: Roll Feeding Motor over speed error
Causes: Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Roll Feeding Motor Assy encoder failure • SUB Board is damaged. • Roll Feeding Motor driver failure
Remedy: 1. Replace the Roll Feeding Motor Assy. 2. Replace the SUB-D Board. 3. Replace the Main Board.

Code: 152C

Description: Roll Feeding Motor reversing error
Causes: Detects accumulatively more than the specified number of times that it is being driven in the opposite direction to the specified driving direction. • The polarity of Roll Feeding Motor Assy cable is opposite. • Roll Feeding Motor Assy encoder failure
Remedy: Replace the Roll Feeding Motor Assy.

Code: 152D

Description: Roll Feeding Motor driving time-out error
Causes: Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
Remedy: Replace the Main Board.

Code: 152E

Description: Roll Feeding Motor velocity deviation error
Causes: Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Roll Feeding Motor Assy encoder failure • Roll Feeding Motor failure • SUB Board is damaged. • Roll Feeding Motor driver failure
Remedy: 1. Replace the Roll Feeding Motor Assy. 2. Replace the SUB-D Board. 3. Replace the Main Board.

Code: 152F

Description: Roll Feeding Motor lock error
Causes: 1. Connection failure of the Roll Feeding Motor Assy. 2. Detects that it is being driven at an irregularly slower speed than the specified value. • Irregular load • Roll Feeding Motor Assy encoder failure • Roll Feeding Motor failure
Remedy: Replace the Roll Feeding Motor Assy.

Code: 1530

Description: Release sensor HP detection error
Causes: When detecting the origin of the driven roller (to reset the driven roller), the status of the Release Sensor and the current roller position do not match. • Release Sensor failure • Release Motor failure
Remedy: 1. Replace the Release Sensor. 2. Replace the Release Motor Assy.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie