Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson Stylus Pro 7710

Code: 1101

Description: CR life error
The number of Carriage movement cycles reached the specified upper limit. (Ink tube’s life)
Remedy: Replace the ink tube (L & R), and clear the counter using the Service Program. In addition, check the statuses of the CR Motor, the driven pulley, the Carriage Unit, and the Head FFC, if any abnormal noise or wear is found, replace the corresponding part(s) along with the ink tube.

Code: 1125

Description: CR HP detection error
The home position of the carriage unit is not detected.
Remedy: Check the connection of the CR HP Sensor. Replace the CR HP Sensor. Check if the carriage lock is operating.

Code: 1138

Description: Over current error
The electric current flowing when driving the motor is irregularly large. (To protect the motor driver) • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
Remedy: Check the connection between the CR Encoder and the Main Board Assy. Check the connection between the CR Motor and the Main Board Assy. Replace the CR Encoder Sensor. Replace the CR Motor.

Code: 113A

Description: Overload error
The electric current flowing when driving the motor is irregularly large. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
Remedy: Check if the Carriage Unit is correctly installed. Check if there is some foreign material on the driving section of the Carriage Unit. Check the connection between the CR Encoder and the Main Board Assy. Check the connection between the CR Motor and the Main Board Assy. Replace the CR Encoder Sensor. Replace the CR Motor.

Code: 113B

Description: Over speed error
Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
Remedy: Replace the CR Encoder Sensor.

Code: 113C

Description: Reversing error
Detects that it is being driven in the opposite direction to the specified driving direction. • The polarity of encoder cable is opposite. • The polarity of motor cable is opposite. • Encoder failure • Irregular load
Remedy: Check the connection between the CR Encoder and the Main Board Assy. Check the connection between the CR Motor and the Main Board Assy. Replace the CR Encoder Sensor.

Code: 113D

Description: Driving time-out error
Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
Remedy: Replace the Main Board Assy.

Code: 113E

Description: Velocity deviation error
Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure
Remedy: Replace the CR Encoder Sensor. Replace the Main Board Assy. Replace the CR Motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie