Description: Waste Ink pads is almost full (less than 1% remaining)
The waste ink pads are almost full, causing a warning error. The printer can continue printing, but this messages overrides status messages such as Ready or Printing.
Remedy: Replace the following parts and reset the counters as described below • Waste Ink Pads • F Box • Pump Assembly • Cap Assembly • Cleaner, Head • From Maintenance Mode 2 enter the Counter Init. Menu and initialize the Waste Ink counter and Cleaning counter.
Description: CPU vector 4 - General illegal instruction
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.
Description: CPU vector 6 - Slot illegal instruction
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.
Description: CPU vector 10 - DMAC/DTC address error
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.
Description: CPU vector 11 - Watchdog time-out error
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.