Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson Stylus Pro 9900 — Trang 10/15

Code: 1537

Description: Pressurizing error
The motor driving does not end even after the specified period of time has passed.
Remedy: Check the connection of the Pressurizing Unit. Check the connection of the Pressure tubes. Replace the Pressurizing Unit.

Code: 153A

Description: Overload error
The electric current flowing when driving the motor is irregularly large. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
Remedy: Check if there is some foreign material causing extra load on the driven roller release system. Check the connection between the Driven Roller Release Motor and the Main Board Assy. Replace the Driven Roller Release Motor.

Code: 153B

Description: Over speed error
Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
Remedy: Replace the Driven Roller Release Motor.

Code: 153C

Description: Reversing error
Detects that it is being driven in the opposite direction to the specified driving direction. • The polarity of encoder cable is opposite. • The polarity of motor cable is opposite. • Encoder failure • Irregular load
Remedy: Check the connection between the Driven Roller Release Motor and the Main Board Assy. Replace the Driven Roller Release Motor.

Code: 153D

Description: Driving time-out error
Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
Remedy: Replace the Main Board Assy.

Code: 153E

Description: Velocity deviation error
Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure
Remedy: Replace the Driven Roller Release Motor. Replace the Main Board Assy.

Code: 153F

Description: Lock error
Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
Remedy: Check if there is some foreign material causing extra load on the driven roller release system. Check the connection between the Driven Roller Release Motor and the Main Board Assy. Replace the Driven Roller Release Motor.

Code: 1540

Description: Cutter HP detection error
The home position of the Cutter is not detected.
Remedy: Check the connection of the Cutter Sensor. Replace the Cutter Unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie