Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson Stylus Pro 9908 — Trang 12/15

Code: 1551

Description: Paper thickness determining error
During detection of paper thickness, the thickness cannot be determined because chattering occurs.
Remedy: Replace the Main Board Assy.

Code: 1561

Description: Paper thickness at power-on error
At power-on, the paper thickness sensor detects more than 2.2 mm paper thickness.
Remedy: Execute the Paper Thickness Sensor Position Adjustment. Replace the Paper Thickness Sensor.

Code: 1800

Description: AID voltage error
Due to the leak of AID current, the specified voltage cannot be achieved.
Remedy: Check the flushing box and around it, and remove ink and dust if attached on it. (Electric current may leak through the accumulated ink or dust.) Replace the AID Board. Replace the Ink System Unit.

Code: 1A23

Description: Incorrect RTC data error
The value information on various absolute time stored on NVRAM is abnormal.
Remedy: Check if the RTC backup battery is installed properly. Replace the Main Board Assy.

Code: 1A26

Description: RTC Access T/O error
The RTC circuit on the Main Board Assy malfunctions.
Remedy: 1. Turn the power off and remove the RTC backup battery. 2. After several seconds, re-attach the battery and turn the power back on. 3. If the printer recovers from the error, set the date and time using the Service Program.

Code: 1A37

Description: Thermistor error
The Head FFC is not connected correctly. The thermistor detects a temperature out of the specification. The thermistor is broken.
Remedy: Replace the Printhead.

Code: 1A38

Description: Transistor environmental temperature error
The transistor has a defect. The thermistor detects a temperature out of the specification.
Remedy: Replace the Printhead.

Code: 1A39

Description: Head error
The drive circuit in the Printhead is damaged due to a slant connection of the Head FFC, etc., or the fuse of the Main Board Assy may has blown because of such a wrong connection.
Remedy: 1. Check the connection of the Head FFC to the Sub Board Assy, and correct it if there is a slant connection or the cable is disconnected. If any connection terminal of the Head FFC is damaged, replace it with a new one. 2. Replace the Printhead. 3. If the printer does not recover from the error after trying 1 and 2., replace the Main Board Assy. (The fuse of the Main Board Assy may have blown due to a slant connection of the Head FFC.)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie