• Code: 113F
• Description: Lock error
  Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
• Remedy: Check if the Carriage Unit is correctly installed. Check if there is some foreign material on the driving section of the Carriage Unit. Check the connection between the CR Encoder and the Main Board Assy. Check the connection between the CR Motor and the Main Board Assy. Replace the CR Encoder Sensor. Replace the CR Motor.

• Code: 122A
• Description: Overload error
  The electric current flowing when driving the motor is irregularly large. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
• Remedy: Check if there is some foreign material causing extra load between the PF Motor and the PF roller. Check the connection between the PF Encoder Sensor and the Main Board Assy. Check the connection between the PF Motor and the Main Board Assy. Replace the PF Encoder Sensor. Replace the PF Motor.

• Code: 122B
• Description: Over speed error
  Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
• Remedy: Replace the PF Encoder Sensor.

• Code: 122C
• Description: Reversing error
  Detects that it is being driven in the opposite direction to the specified driving direction. • The polarity of encoder cable is opposite. • The polarity of motor cable is opposite. • Encoder failure • Irregular load
• Remedy: Check the connection between the PF Encoder Sensor and the Main Board Assy. Check if there is some foreign material causing extra load between the PF Motor and the PF roller. Replace the PF Encoder Sensor.

• Code: 122D
• Description: Driving time-out error
  Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
• Remedy: Replace the Main Board Assy.

• Code: 122E
• Description: Velocity deviation error
  Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure
• Remedy: Replace the PF Encoder Sensor. Replace the Main Board Assy. Replace the PF Motor.

• Code: 122F
• Description: Lock error
  Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
• Remedy: Check if there is some foreign material causing extra load between the PF Motor and the PF roller. Check the connection between the PF Encoder Sensor and the Main Board Assy. Check the connection between the PF Motor and the Main Board Assy. Replace the PF Encoder Sensor. Replace the PF Motor.

• Code: 131B
• Description: Head driver (transmission gate) overheat error
  The temperature of the Head Driver rises, and reaches the specified level.
• Remedy: Check the connection of the Head FFC, and if there is abnormality (slant connection or the like), correct it. Replace the Printhead.