Code :

Code: 56H
Description: Contact error at ink replacement timing (Power-off)
Causes: • Foreign object • Ink Cartridges are not installed correctly • Paper jam

Code: 5BH
Description: Insoluble paper jam error
Causes: • Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam

Code: 83H
Description: Reflector no reflection error
Causes: • Defective Fault Detection Plate* (detachment, peeled reflector) • Sensor failure (contaminated Sensor, damaged FFC, PIS Board installation failure)

Code: 88H
Description: Excessive Light error
Causes: • Abnormal sensor output (Sensor failure, PIS Board failure) • Unexpected excessive amount of light such as too much diffused light from outside is shed on the sensor because the housings are removed. (When used outdoors or near the window where direct sunlight comes in)

Code: 89H
Description: Insufficient Light error
Causes: • Sensor failure (PIS Board installation failure, contaminated Sensor) • Abnormal sensor output (Break of FFC during printer operation, PIS Board failure) • Unable to accurately detect where the fault detection plate is because too much diffused light from outside is shed on the sensor. (When used outdoors or near the window where direct sunlight comes in) • Ink Cartridge failure (contaminated/damaged prism)

Code: B0H ... CFH
Description: Ink device error
Causes: • Ink Cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure

< 1 2 3 4 5 >