Danh mục sản phẩm

Code :

Code: 20
Display: 20 INSUFFICIENT MEMORY
Description: The printer has received more data from the computer than fits in available memory.
Remedy: 1. Press GO to resume printing. Note A loss of data will occur. 2. Reduce the complexity of the print job to avoid this error. 3. Adding memory to the printer may allow printing of more complex pages.

Code: 22
Display: 22 EIO X BUFFER OVERFLOW
Description: The printer’s EIO card in slot X has overflowed its I/O buffer during a busy state.
Remedy: Press GO to resume printing. Note A loss of data will occur.

Code: 22
Display: 22 PARALLEL I/O BUFFER OVERFLOW
Description: The printer’s parallel buffer has overflowed during a busy state.
Remedy: Press GO to resume printing. Note A loss of data will occur.

Code: 22
Display: 22 SERIAL I/O BUFFER OVERFLOW
Description: The printer’s serial buffer has overflowed during a busy state.
Remedy: Press GO to resume printing. Note A loss of data will occur.

Code: 40
Display: 40 BAD SERIAL TRANSMISSION
Description: A serial data error (parity, framing, or line overrun) has occurred while the printer was receiving data.
Remedy: Press GO to resume printing. Note A loss of data will occur.

Code: 40
Display: 40 EIO X BAD TRANSMISSION
Description: A connection with the card in EIO slot X has been abnormally broken
Remedy: 1. Press GO to resume printing. Note A loss of data will occur. 2. Check that all cables are connected to the EIO ports and that the EIO board is seated properly. 3. If possible, print to another network printer to verify the network is working properly.

Code: 41.3
Display: 41.3 UNEXPECTED SIZE IN TRAY X
Description: Media is loaded which is longer or shorter in the feed direction than the size configured for the tray.
Remedy: 1. If the incorrect size was selected, cancel the job or press ? to access help. 2. Press up and down to step through the instructions.

Code: 41.5
Display: 41.5 UNEXPECTED TYPE IN TRAY X
Description: The printer senses a different media type in the media path than configured in the tray.
Remedy: 1. If the incorrect type was selected, cancel the job or press to access ? help. 2. Press up and down to step through the instructions.

< 1 2 3 4 5 >

0