Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Color LaserJet CM1017 MFP — Trang 3/3

Code: 50.3

Display: 50.x Fuser error
Description: The device has experienced an internal hardware error.
slow fuser
Remedy: 1. Power-cycle the MFP. 2. If the message persists, replace the fuser. 3. If the message persists, replace the DC controller. 4. Perform post-repair tests #1 and #2. 5. If the message persists, replace the whole MFP.

Code: 51.20

Display: 51.20 Error
Description: The device has experienced an internal hardware error.
black scanner error
Remedy: 1. Power-cycle the MFP. 2. Verify that the flat-flex cable connecting the DC controller to the formatter is securely connected. 3. If the message persists, replace the DC controller. 4. Perform post-repair tests #1 and #2. 5. If the message persists, replace the whole MFP.

Code: 51.21

Display: 51.20 Error
Description: The device has experienced an internal hardware error.
cyan scanner error
Remedy: 1. Power-cycle the MFP. 2. Verify that the flat-flex cable connecting the DC controller to the formatter is securely connected. 3. If the message persists, replace the DC controller. 4. Perform post-repair tests #1 and #2. 5. If the message persists, replace the whole MFP.

Code: 51.22

Display: 51.20 Error
Description: The device has experienced an internal hardware error.
magenta scanner error
Remedy: 1. Power-cycle the MFP. 2. Verify that the flat-flex cable connecting the DC controller to the formatter is securely connected. 3. If the message persists, replace the DC controller. 4. Perform post-repair tests #1 and #2. 5. If the message persists, replace the whole MFP.

Code: 51.23

Display: 51.20 Error
Description: The device has experienced an internal hardware error.
yellow scanner error
Remedy: 1. Power-cycle the MFP. 2. Verify that the flat-flex cable connecting the DC controller to the formatter is securely connected. 3. If the message persists, replace the DC controller. 4. Perform post-repair tests #1 and #2. 5. If the message persists, replace the whole MFP.

Code: 79

Display: 79 Error
Description: The device has experienced an internal firmware error.
Remedy: 1. Verify that the most current firmware is installed on the MFP. Load the most current version if necessary. 2. Power-cycle the MFP. 3. If the message persists, perform an NVRAM initialization. 4. If the message persists, replace the formatter. 5. Perform post-repair tests #1, #2, and #3.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie