• Code: 59.63
• Display: 59.63 Error
• Description: The yellow-image-drum motor experienced a rotational error.
• Remedy: 1. Perform the image-drum motors component test in the Troubleshooting menu. 2. Reconnect the connectors of the yellowimage- drum motor (J1712) and the DC controller PCA (J138). 3. Replace the yellow-image-drum motor.

• Code: 59.90
• Display: 59.90 Error
• Description: The ITB motor rotated abnormally.
• Remedy: Check the ITB motor and ITB unit.

• Code: 59.A0
• Display: 59.A0 Error
• Description: The ITB motor rotated abnormally.
• Remedy: Check the ITB motor and ITB unit.

• Code: 59.C0
• Display: 59.C0 Error
• Description: The developer-disengagement motor experienced a rotational error.
• Remedy: 1. Perform the alienation motor component tests in the Troubleshooting menu. 2. Reconnect the connectors of the yellow/ magenta-developing disengagement motor (J1719), cyan/black-developing disengagement motor (J1718), print cartridge PCA (J404, J405, J406, J408), and the DC controller PCA (J141, J142). 3. Check the print-cartridge drive unit if the adjustment pin sticks in. 4. Check the main drive unit if the lever locks. 5. Replace the primary-transfer-roller disengagement motor.

• Code: 59.F0
• Display: 59.F0 Error
• Description: The primary-transfer-roller disengagement motor experienced an error.
• Remedy: 1. Check the ITB alienation sensor (m) by performing either the manual sensor test or the paper-path sensors test in the Troubleshooting menu. 2. Reconnect the connectors of the ITB home-position sensor (J2010), the cartridge driver PCA (J406, J407), and the DC controller PCA (J142). 3. Perform the ITB contact/alienation component test in the Troubleshooting menu. 4. Reconnect the connectors of the primary-transfer-roller disengagement motor (J1709) and the DC controller PCA (J110). 5. Replace the primary-transfer-roller disengagement motor.

• Code: 59.XY
• Display: 59.XY ERROR
• Description: A temporary printing error occurred.
• Remedy: Turn the product off and then on.

• Code: 60.02
• Display: 60.02 Tray 2 lifting error
• Description: The Tray 2 lifter motor experienced an error.
• Remedy: 1. Check the Tray-2 paper-surface sensor in the Manual Sensor Test 2 menu in the Troubleshooting menu. 2. Reconnect the connectors of the cassette lifter motor (J1920) and the DC controller PCA (J112). 3. Replace the lifter drive unit.

• Code: 60.03
• Display: 60.03 Tray 3 lifting error
• Description: The Tray 3 lifter motor experienced an error
• Remedy: 1. Check the Tray-3 paper-surface sensor in the Manual Sensor Test 2 menu in the Troubleshooting menu. 2. Reconnect the connectors of the cassette lifter motor (J1920) and the DC controller PCA (J112). 3. Replace the lifter drive unit.