Code :

Code: 30.01.43
Display: 30.01.43 Scanner failure
Description: The CPB memory is full.
Remedy: 1. Connect the CPB memory. 2. Turn the product off and then on. 3. Replace the CPB memory.

Code: 30.01.44
Display: 30.01.44 Scanner failure
Description: There is an SCB communication error.
Remedy: 1. Turn the product off and then on. 2. Check the SCB/CPB connections. 3. Check the SCB LEDs.

Code: 30.01.45
Display: 30.01.45 Scanner failure
Description: The CPB memory is full.
Remedy: 1. Turn the product off and then on. 2. Check the SCB/CPB connections. 3. Check the SCB LEDs.

Code: 30.01.46
Display: 30.01.46 Scanner failure
Description: The CPB enumeration failed.
Remedy: 1. Turn the product off and then on. 2. Check the PCI cable at the scanner and formatter. 3. Check the SCB connections. 4. Replace the CPB

Code: 40
Display: 40 Embedded I/O Bad Transmission
Description: A temporary printing error occurred. The connection between the product and the EIO card in the specified slot has been broken.
Remedy: Touch OK to clear the error message and continue printing. Turn the product off and then on.

Code: 41.3
Display: 41.3 Load Tray <XX>: [Type] [Size]
Description: The specified tray is loaded with media that is longer or shorter in the feed direction than the size adjusted for the tray. This message also appears if two or more sheets of media stick together in the product or if the tray is not adjusted correctly. If using glossy paper, ensure that it has been acclimated.
Remedy: Touch OK to use another tray. Reconfigure the size in a tray so that the product will use a tray that is loaded with the correct media size. If the message does not clear automatically from the control-panel display, turn the product off and then on.

Code: 41.5
Display: 41.5 Load Tray <XX>: [Type], [Size] To use another tray, touch OK
Description: The product detected an unexpected paper size. There is a tray type mismatch. The tray is a cassette and there is another tray available for use.
Remedy: To continue, load the tray with the size and type indicated. Or, if another tray is available, touch OK to use it. This problem affects printing, but some scan functions might still be available.

Code: 41.X
Display: 41.X ERROR
Description: A temporary printing error occurred.
Remedy: Touch OK to clear the error. If the error is not cleared, turn the product off and then on.