Code :

Code: 60.03
Display: 60.03 ERROR
Description: Tray 3 is not lifting correctly.
Remedy: 1. Reconnect connector J408 on the paper deck controller PCA and the intermediate connector J11. 2. Run the sensor test in sensor monitor mode to verify that the cassette media stack surface sensor is functioning properly. If it is not, replace the pickup assembly. 3. Reconnect connector J15 of the lifter motor. Also check J407 on the paper deck controller PCA. 4. If the message persists, replace the lifter drive assembly.

Code: 60.04
Display: 60.04 ERROR
Description: Tray 4 is not lifting correctly.
Remedy: 1. Reconnect connector J406 on the paper deck controller PCA and the intermediate connector J21. 2. Run the sensor test in sensor monitor mode to verify that the cassette media stack surface sensor is functioning properly. If it is not, replace the pickup assembly. 3. Reconnect connector J24 of the lifter motor. Also check J405 on the paper deck controller PCA. 4. If the message persists, replace the lifter drive assembly.

Code: 60.05
Display: 60.05 ERROR
Description: Tray 5 is not lifting correctly.
Remedy: 1. Reconnect the connector J403 on the paper deck controller PCA and the intermediate connector J31. 2. Run the sensor test in the sensor monitor mode to verify that the PD cassette media stack surface sensor is functioning properly. If it is not, replace the middle pickup assembly. 3. Reconnect the connector J34 of the lifter motor and the connector. Also check J402 on the paper deck controller PCA. 4. If the message persists, replace the lifter drive assembly.

Code: 68.X
Display: 68.X PERMANENT STORAGE FULL
Description: The product NVRAM is full. Some settings saved in the NVRAM might have been reset to the factory defaults. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.
X values • 0 = Internal memory • 1 = Removable disk
Remedy: Press the OK button to clear the message. If the message is not cleared, turn the product off, and then turn the product on.

Code: 68.X
Display: 68.X PERMANENT STORAGE WRITE FAIL
Description: The product NVRAM is failing to write. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.
X values • 0 = Internal memory • 1 = Removable disk
Remedy: Press the OK button to clear the message. If the message is not cleared, turn the product off, and then turn the product on.

Code: 68.X
Display: 68.X STORAGE ERROR SETTINGS CHANGED
Description: One or more product settings are invalid and have been reset to the factory-default settings. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.
Remedy: Press the OK button to clear the message. If the message is not cleared, turn the product off, and then turn the product on.

‹ First < 7 8 9 10 11 >