Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Color LaserJet Enterprise CP5525 — Trang 2/16

Code: 10.XX.34

Display: 10.XX.34 Used supply in use
Description: The indicated cartridge is used.
• 10.00.34 Black print cartridge • 10.01.34 Cyan print cartridge • 10.02.34 Magenta print cartridge • 10.03.34 Yellow print cartridge
Remedy: NOTE: Removing a cartridge from one product and then installing it in a different product (for testing functionality) will cause this event code.

Code: 10.XX.40

Display: 10.XX.40 Genuine HP supplies installed
Description: More than one genuine HP print cartridge has been installed.
• 10.00.40 Black print cartridge • 10.01.40 Cyan print cartridge • 10.02.40 Magenta print cartridge • 10.03.40 Yellow print cartridge
Remedy: No action necessary.

Code: 10.XX.41

Display: 10.XX.41 Unsupported supply in use
Description: The indicated print cartridge is for a different product.
• 10.00.41 Black print cartridge • 10.01.41 Cyan print cartridge • 10.020.41 Magenta print cartridge • 10.03.41 Yellow print cartridge
Remedy: Remove the indicated print cartridge, and then install the correct cartridge for this product.

Code: 10.XX.70

Display: 10.XX.70 Printing past very low
Description: The product indicates when a supply level is very low. The actual remaining print cartridge life might vary. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable.
• 10.00.7010.00.70 Black print cartridge • 10.01.70 Cyan print cartridge • 10.02.70 Magenta print cartridge • 10.03.70 Yellow print cartridge
Remedy: If print quality is no longer acceptable, replace the indicated print cartridge. See the parts chapter in the service manual for the correct cartridge part number.

Code: 13.00.00

Display: 13.00.00
Description: Generic jam event code.
Remedy: Check the product for a jam.

Code: 13.A3.FF

Display: 13.A3.FF
Description: Power on jam at the Tray 3 feed sensor.
Remedy: Check the product for a jam.

Code: 13.B2.9Z

Display: 13.WX.YZ Jam below control panel
Description: Page at duplex switchback jam. Z = the source tray number
Remedy: Check the product for a jam

Code: 13.B9.CZ

Display: 13.WX.YZ Fuser wrap jam
Description: Fuser wrap jam This jam occurs when the paper disappears from the fuser output sensor before a designated amount of time after the paper reached the fuser output sensor (It is determined that the paper is being wrapped around the fuser roller). Z = fuser mode • 1 = Normal auto sense • 2 = Normal non-auto sense • 3 = Light 1 to 3 • 4 = Heavy 1 • 5 = Heavy 2 • 6 = Heavy 3 • 7 = Glossy 1 • 8 = Glossy 2 • 9 = Glossy 3 • A = Glossy film • B = Transparency • C = Label • D = Envelope 1 to 3 • E = Rough • 0 = Photo 1 to 3‚
Remedy: Clear the jam
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie