Danh mục sản phẩm

Code :

Code: 01:10
Description: Electronics Module failure.
Remedy: Replace the Electronics Module

Code: 01:11
Description: The Electronics Module is incorrectly positioned.
Remedy: Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position.

Code: 01:12
Description: Electronics Module failed during the firmware upgrade OR the Electronics
Remedy: Module failed during initialization.

Code: 02:10
Description: Carriage failure.
Remedy: Replace the Carriage Assembly

Code: 02:10
Description: Carriage failure.
Remedy: Replace the Carriage Assembly

Code: 04:13
Description: Generic Firmware Error (Network Card).
Remedy: Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared. If the error code continue

Code: 08:11
Description: Front Panel cannot be detected.
Remedy: Reconnect the Front Panel.

Code: 11:10
Description: Trailing Cable Failure.
Remedy: Replace the Carriage Assembly. Replace the Electronics Module

1 2 3 4 > Last ›

0